Enveloppes VCAs et Mixers - Claviers & pianos

Module A-138e contains four identical units that can be used for different crossfading, mixing and polarizing applications: Polarizer: only input A is used, inputs B and C are unconnected. In this case the sub-unit works as a polarizer. In the ccw positio...

Module A-141 (VCADSR) is the voltage controlled version on an ADSR type envelope generator
a bit like the the voltage controlled version of the A-140. Whenever a gate signal is sensed at the VCADSR's gate input, an adjustable sequence of voltages is ...

Le Module A-132-3 est composé de 2 VCA (Ampli Contrôlé en Tension)strictement identiques. Chaque VCA est équipé d'un bouton pour le gain, d'une entrée CV avec son bouton d'atténuation. La réaction du contrôle peut être choisi entre linaire et ...

odule A-132-4 contains four identical voltage controlled amplifiers (VCA) with exponential control scales. Each VCA has two control voltage inputs (C1, C2), a signal input (In) and a signal output (Out). The control voltage inputs C1 and the signal inputs...

Module A-135 is a quad voltage controlled mixer. It is made of 4 independent linear VCA's. The VCA outputs are mixed to a common output. For each VCA the following inputs and controls are available: audio input with attenuator, control voltage input with ...

Module A-135 is a quad voltage controlled mixer. It is made of 4 independent linear VCA's. The VCA outputs are mixed to a common output. For each VCA the following inputs and controls are available: audio input with attenuator, control voltage input with ...

Module A-138m is a 4 x 4 matrix mixer with switches for unipolar/bipolar mode for each column. Unipolar means that the controls work as attenuators. Bipolar means that the controls work as polarizers. In this mode the amplification is zero in the middle p...