Trigs et Cvs - Claviers & pianos

Module A-183-1 is a simple passive dual attenuator. Passive means, that each unit is made of two sockets and a 50k linear potentiometer only. There are no active parts like amplifiers or buffers and no power supply is required. This is how the A-183-1 wor...

Module A-183-3 is a simple amplifier. It is DC coupled and can be used for both CV and audio signals. The maximal amplification can be switched between 1, 2 and 4 (in position 1 the module does not work as a real amplifier but only as attenuator). The lev...

Module A-186 is a very simple, passive unit that combines up to 7 gate, trigger or analog signals by or-wiring. Function:
if all seven inputs are low or open the output is low
if one or more of the seven inputs is high the output turns high Appl...

Module A-183-2 is a simple voltage offset generator combined with an attenuator/polarizer for the CV input. The function is similar to the vocoder slew-limiter module A-129-3. But the A-183-2 has only one channel available and does not offer the slew feat...

Module A-175 (Dual Voltage Inverter) is exactly what it says it is: two identical inverters, which will take a voltage and output it in an inverted form
so that an input of +5 V will be output as -5 V, an input of -2 V will be output as +2 V, and so ...

Active bus access module to feed CV and Gate into the A-100 bus (e.g. when using more than one frame or with external CV/Gate interfaces). Miniature jack sockets for CV In, Gate In, 2xCV Out, 2xGate Out, 2 LEDs for CV/Gate control In general the A-185 is ...

A-149-2 is an extension module for A-149-1. It makes available 8 digital random voltages (i.e. only low/high states like a gate signal). The outputs are controlled by the Quantized Random Voltages section of the assigned A-149-1 and correspond to the 8 di...