Trigs et Cvs - Claviers & pianos

Module A-150 (Dual VCS) contains two separate voltage-controlled switches. Each switch has a control voltage input, a common Out / Input, and two In / Outputs. The switches are bi-directional: they can work in both directions, so can connect one input to ...

A-172 is a minimum/maximum selector module and is equipped with four analog inputs and two analog outputs (minimum, maximum). The main application of the module is the processing/mixing of control voltages, e.g. random voltages, ADSR, LFO, S&H, ribbon CV,...

Economically priced module for connecting one foot controller and one double foot switch for control A-100 functions by means of the feet. For example the frequency of a filter or the loudness can be controlled by a foot controller, but even other paramet...

Le Module A-151 (Quad Sequential Switch) est similaire à un bouton rotatif 4 positions. A chaque fois qu'un signal pulse est reçu dans l'entrée trigger, l'entrée/sortie commune est connectée séquentiellement à l'entrée/sortie suivante. Une fois arr...

Le Module A-161 est un clock(horloge) sequenceur 8 pas qui se connecte directement en interne au module A-160 Clock DIVIDER (diviseur d'horloge). L'horloge du A-160 fait défiler un signal trig sur les 8 sorties alternativement qui peuvent être connectée à...

Module A-164-1 is equipped with 3 push buttons that are used to generate three separate manual gate signals (i.e. ~ +12V voltage output while button is operated, 0V when released). The gate number (1, 2, 3) is milled into the caps and white inked. Gate 1 ...

Module A-165 (Dual Trigger Modifier) contains two separate trigger modifiers, to use with logical / digital levels (Gate, Clock, Trigger). Each half of the module enables signals generated by the A-100 to communicate with other instruments (such as an ext...